HOME

Under Construction

Under Construction

EQUIPMENT

ENDECOTTS

dividers.jpg

SAMPLE DIVIDERS


Endecotts hand held sample dividers will subdivide material samples into two smaller portions by a single pass. Further subdivisions can be attained by multiple passes. Each subdivision created with an Endecotts sample divider retains the characteristics of the original sample.


ADVANTAGES

  • Unit consists of divider plus 3 receiving boxes
  • Stainless steel with slot widths.
  • Will subdivide material samples into two smaller portions by single pass
  • Each subdivision retains the characteristics of the original sample
  • Based on recommendations of BS 5309 and BS 3406/1


Specifications:

Application Dividing
Overall length of Divider body 1/2" - 22.90 cm or 1/4" - 13.00 cm
Overall width of Divider body 1/2" - 21.60 cm or 1/4" - 13.30 cm
Overall height of Divider body 1/2" - 13.35 cm or 1/4" - 10.15 cm
Overall length of Divider boxes 1/2" - 18.42 cm or 1/4" - 9.86 cm
Overall width of Divider boxes 1/2" - 9.86 cm or 1/4" - 6.35 cm
Overall depth of Divider boxes 1/2" - 12.07 cm or 1/4" - 5.24 cm
Weight 1/2" - 3 kg or 1/4" - 1 kg
Volume 1/2" - 1.9 litres or 1/4" - 0.3 litres
Slots 12 - slots 1/2" or 1/4" wide x 3 15/16" or 2 7/8" long