The IF 2000G/F/FCA are automatic instruments for the determination of the ash fusion points by the mean of image analysis. This determination uses the most modern technology for monitoring, computing, storing results and curves obtained during the test according with your specifications. Once the sample is introduced into the furnace, the operator is free until the end of the analyze. The results and the curves are automatically stored in a DATA BASE and automatic reports are printed. The analyzer can work with 6 Ash Samples in Semi-Atomatic Mode and 4 ash samples simultaneously in Full Automatic Mode , all the dimensions, rounding, form factor, volume ... are individually computed and stored . Each sample picture is individually stored 1°C by 1°C, and can be easily retrieved in your own report
IF2000G Up to 4 Samples in Full Automatic Mode (Biomass Ash or Coal Ash), any Sample Shape from 3*3*3mm up to 19*6*6mm (Heating Elements and Ceramic with up to 1750°C Capability) According to Norms: CEN, ISO, ASTM, AFNOR, BRITISH and AUSTRALIAN for Biomass, Refuse-Derived Fuels and Coal.
IF2000FCA Up to 6 Samples in Semi Automatic Mode, up to 4 Samples in Full automatic Mode (Coal Ash Only),any Sample Shape from 3*3*3mm up to 19*6*6mm (Heating Elements and Ceramic with up to 1580°C Capability)According to Norms: ISO, ASTM.